ROOM TEMPERATURE SENSOR(for Rear Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 COOLER THERMISTOR


    1. B004RYHC01
      B004RMI Remove in this Direction

      Detach the claw and guide in the direction indicated by the arrow shown in the illustration and remove the cover.

    2. B004W4R

      Detach the claw and guide and disconnect the cooler thermistor (No. 2 room temperature sensor) from the rear door trim.

    3. B004V5S

      Disconnect the connector and remove the cooler thermistor (No. 2 room temperature sensor).