CONDENSER REASSEMBLY

PROCEDURE

1. Click here

   INSTALL COOLER DRYER

   
   
   1. 

      *a

      Modulator

      Using needle-nose pliers, install a new cooler dryer to the modulator.

   2. 

      Sufficiently apply compressor oil to the 3 new O-rings and the fitting surface of a new cap.

      Compressor Oil
      ND-OIL 11 or equivalent

      Note:
      

      • Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is used, compressor motor insulation performance may decrease, resulting in leakage of electric power.

      • Keep the O-ring and O-ring fitting surface free of foreign matter.

   3. 

      *a

      Modulator

      Using a 14 mm straight hexagon socket wrench, install the cap to the modulator.

      4.0 N*m

      41 kgf*cm

      35 in.*lbf

      Note:

      Make sure not to cut the O-ring while installing it. (Cut O-rings cannot be installed)