FRONT AIR CONDITIONING UNIT COMPONENTS
ILLUSTRATION
| *1 | LOWER RADIATOR AIR DEFLECTOR | *2 | RADIATOR COVER PLATE |
| *3 | UPPER RADIATOR SUPPORT SEAL | *4 | V-BANK COVER SUB-ASSEMBLY |
ILLUSTRATION
| *A | for 2WD | *B | for AWD |
| *1 | NO. 1 ENGINE UNDER COVER ASSEMBLY | *2 | NO. 2 ENGINE UNDER COVER ASSEMBLY |
| *3 | TRANSMISSION UNDER COVER | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| ★ | Precoated part | - | - |
ILLUSTRATION
| *1 | LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY | *2 | NEGATIVE AUXILIARY BATTERY TERMINAL |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *A | w/ Headup Display | - | - |
| *1 | HEADUP DISPLAY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | for LHD | *B | w/ Rear Cooler |
| *C | w/o Rear Cooler | - | - |
| *1 | COOLER PIPE GROMMET | *2 | COOLER REFRIGERANT LIQUID PIPE A |
| *3 | COWL VENTILATOR SPLASH SHIELD RH | *4 | FENDER APRON BRACE SUB-ASSEMBLY LH |
| *5 | HOLE PLUG | *6 | SUCTION TUBE SUB-ASSEMBLY B |
| *7 | O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Compressor oil ND-OIL 11 or equivalent | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | FENDER APRON BRACE SUB-ASSEMBLY RH | *2 | GENERATOR CABLE |
| *3 | HEATER PIPE GROMMET | *4 | INLET HEATER WATER HOSE |
| *5 | INVERTER COVER ASSEMBLY RH | *6 | INVERTER MOTOR CABLE BRACKET ASSEMBLY |
| *7 | INVERTER TERMINAL COVER | *8 | MOTOR CABLE |
| *9 | OUTLET HEATER WATER HOSE | *10 | CONNECTOR COVER ASSEMBLY |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
ILLUSTRATION
| *A | for RHD | *B | w/ Rear Cooler |
| *C | w/o Rear Cooler | - | - |
| *1 | COOLER PIPE GROMMET | *2 | COOLER REFRIGERANT LIQUID PIPE A |
| *3 | COWL VENTILATOR SPLASH SHIELD LH | *4 | GENERATOR CABLE |
| *5 | HOLE PLUG | *6 | INVERTER TERMINAL COVER |
| *7 | MOTOR CABLE | *8 | SUCTION TUBE SUB-ASSEMBLY B |
| *9 | CONNECTOR COVER ASSEMBLY | *10 | O-RING |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| |
Compressor oil ND-OIL 11 or equivalent | ● | Non-reusable part |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | FENDER APRON BRACE SUB-ASSEMBLY RH | *2 | HEATER PIPE GROMMET |
| *3 | INLET HEATER WATER HOSE | *4 | OUTLET HEATER WATER HOSE |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | LOWER CENTER PILLAR GARNISH LH | *2 | LOWER CENTER PILLAR GARNISH RH |
| *3 | REAR DOOR SCUFF PLATE LH | *4 | REAR DOOR SCUFF PLATE RH |
ILLUSTRATION
| *1 | ACCELERATOR PEDAL | *2 | AIR DUCT PLUG |
| *3 | FRONT FLOOR CARPET ASSEMBLY FRONT | *4 | FRONT FLOOR CAUTION PLATE COVER |
| *5 | REAR NO. 3 AIR DUCT | *6 | ACCELERATOR PEDAL PAD |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | - | - |
ILLUSTRATION
| *A | for LHD | *B | for 2WD |
| *1 | FRONT FLOOR MAT LH | *2 | REAR AIR DUCT GUIDE LH |
| *3 | REAR NO. 2 AIR DUCT | - | - |
ILLUSTRATION
| *A | for LHD | *B | for AWD |
| *1 | FRONT FLOOR MAT LH | *2 | REAR AIR DUCT GUIDE LH |
| *3 | REAR NO. 2 AIR DUCT | - | - |
ILLUSTRATION
| *A | for LHD | *B | except Rear Power Seat with Ottoman |
| *C | for Rear Power Seat with Ottoman | - | - |
| *1 | FRONT FLOOR MAT RH | *2 | REAR AIR DUCT GUIDE RH |
| *3 | REAR NO. 1 AIR DUCT | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | FRONT FLOOR MAT RH | *2 | REAR AIR DUCT GUIDE RH |
| *3 | REAR NO. 1 AIR DUCT | - | - |
ILLUSTRATION
| *A | for RHD | *B | for 2WD |
| *C | except Rear Power Seat with Ottoman | *D | for Rear Power Seat with Ottoman |
| *1 | FRONT FLOOR MAT LH | *2 | REAR AIR DUCT GUIDE LH |
| *3 | REAR NO. 2 AIR DUCT | - | - |
ILLUSTRATION
| *A | for RHD | *B | for AWD |
| *C | except Rear Power Seat with Ottoman | *D | for Rear Power Seat with Ottoman |
| *1 | FRONT FLOOR MAT LH | *2 | REAR AIR DUCT GUIDE LH |
| *3 | REAR NO. 2 AIR DUCT | - | - |
ILLUSTRATION
| *1 | INSTRUMENT PANEL WIRE | *2 | NO. 2 AIR DUCT SUB-ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o PTC Heater | *B | w/ PTC Heater |
| *C | w/o VGRS | *D | w/ VGRS |
| *1 | FRONT STEERING CONTROL ECU | *2 | HYBRID VEHICLE CONTROL ECU ASSEMBLY |
| *3 | NO. 2 SEMICONDUCTOR POWER INTEGRATION ECU | *4 | PASSENGER SIDE JUNCTION BLOCK ASSEMBLY WITH NETWORK GATEWAY ECU |
| *5 | SEMICONDUCTOR POWER INTEGRATION ECU | *6 | SHIFT CONTROL ECU |
| *7 | WIRING HARNESS CLAMP BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | AIR CONDITIONING AMPLIFIER ASSEMBLY | *2 | INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU |
| *3 | NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY | *4 | NO. 2 HEATER TO REGISTER DUCT |
| *5 | NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY | *6 | NO. 3 HEATER TO REGISTER DUCT |
| *7 | NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY | *8 | HEATER BRACKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT ASSEMBLY | *2 | LOWER DEFROSTER NOZZLE ASSEMBLY |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | AIR CONDITIONER UNIT ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | NO. 1 INSTRUMENT PANEL SPACER | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | NO. 1 INSTRUMENT PANEL SPACER | - | - |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | ASPIRATOR | *2 | COOLER THERMISTOR (ROOM TEMPERATURE SENSOR) |
| *3 | DRAIN COOLER HOSE (for Driver's Side) | *4 | DRAIN COOLER HOSE (for Front Passenger Side) |
| *5 | NO. 2 COOLER UNIT DRAIN HOSE | *6 | NO. 3 COOLING UNIT PACKING |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for LHD | *B | w/ PTC Heater |
| *C | w/o PTC Heater | - | - |
| *1 | AIR CONDITIONING HARNESS ASSEMBLY | *2 | AIR CONDITIONING TUBE ASSEMBLY |
| *3 | COOLER EXPANSION VALVE | *4 | COOLING UNIT PARTS |
| *5 | HEATER COVER | *6 | HEATER GROMMET |
| *7 | HEATER RADIATOR UNIT SUB-ASSEMBLY | *8 | NO. 1 COOLER COVER |
| *9 | NO. 2 COOLER COVER | *10 | PACKING |
| *11 | QUICK HEATER ASSEMBLY | *12 | HEATER CLAMP |
| *13 | O-RING | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 11 or equivalent | - | - |
ILLUSTRATION
| *A | for RHD | *B | w/ PTC Heater |
| *C | w/o PTC Heater | - | - |
| *1 | AIR CONDITIONING HARNESS ASSEMBLY | *2 | AIR CONDITIONING TUBE ASSEMBLY |
| *3 | COOLER EXPANSION VALVE | *4 | COOLING UNIT PARTS |
| *5 | HEATER COVER | *6 | HEATER GROMMET |
| *7 | HEATER RADIATOR UNIT SUB-ASSEMBLY | *8 | NO. 1 COOLER COVER |
| *9 | NO. 2 COOLER COVER | *10 | NO. 3 COOLING UNIT BRACKET |
| *11 | PACKING | *12 | QUICK HEATER ASSEMBLY |
| *13 | HEATER CLAMP | *14 | O-RING |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Compressor oil ND-OIL 11 or equivalent | - | - |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | HEATER AIR DAMPER ASSEMBLY | *2 | NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *3 | NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *4 | NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *5 | NO. 3 COOLING UNIT BRACKET | *6 | NO. 4 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *7 | NO. 5 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *8 | NO. 6 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *9 | Gear | - | - |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | HEATER AIR DAMPER ASSEMBLY | *2 | NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *3 | NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *4 | NO. 3 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *5 | NO. 4 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *6 | NO. 5 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY |
| *7 | NO. 6 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY | *8 | Gear |
ILLUSTRATION
| *A | for LHD | - | - |
| *1 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY | *2 | NO. 1 COOLER THERMISTOR |
| *3 | NO. 1 COOLING UNIT BRACKET | *4 | NO. 2 COOLING UNIT BRACKET |
| *5 | NO. 4 COOLING UNIT PACKING | *6 | HEATER CASE (for Front Side) |
| *7 | HEATER CASE (for Rear Side) | *8 | O-RING |
| ● | Non-reusable part | |
Compressor oil ND-OIL 11 or equivalent |
ILLUSTRATION
| *A | for RHD | - | - |
| *1 | NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY | *2 | NO. 1 COOLER THERMISTOR |
| *3 | NO. 1 COOLING UNIT BRACKET | *4 | NO. 2 COOLING UNIT BRACKET |
| *5 | NO. 4 COOLING UNIT PACKING | *6 | HEATER CASE (for Front Side) |
| *7 | HEATER CASE (for Rear Side) | *8 | O-RING |
| ● | Non-reusable part | |
Compressor oil ND-OIL 11 or equivalent |