Click here

FRONT BLOWER MOTOR INSTALLATION

Click here
Click here

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

Click here

PROCEDURE


  1. Click here

    INSTALL NO. 2 COOLING UNIT PACKING


    1. B004U0WC01
      *1 No. 2 Cooling Unit Packing

      When reusing the blower motor with fan sub-assembly:


      1. Install a new No. 2 cooling unit packing to the blower motor with fan sub-assembly.

  2. Click here

    INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. B004V9LC01
      B004RMI Install in this Direction

      Insert the blower motor with fan sub-assembly.

      Note:

      Make sure there is no interference with the fan as it will impact the cooling performance.

    2. B004YR3C01
      B004SZX Screw
      B004UK4 Connector

      Install the blower motor with fan sub-assembly with the 3 screws.

    3. Connect the connector.

  3. Click here

    INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. Click here

    INSTALL INSTRUMENT SIDE PANEL RH

    Click here