AIR CONDITIONING SYSTEM A/C Switch Indicator does not Turn On

DESCRIPTION

The A/C switch indicator on multi-display turns off, the following malfunctions are possible.

Symptom Factor
The A/C switch indicator on multi-display turns off
  • Air conditioning amplifier assembly

  • Radio receiver assembly

  • A/C switch (multi-display)

  • Malfunction in one of the servo motors (initialization incomplete)

  • Damper and link operation (jamming)

  • Refrigerant pressure malfunction (low pressure)

  • Low ambient temperature (including thermistor assembly)

PROCEDURE


  1. CHECK MALFUNCTION STATUS


    1. Check the malfunction status of A/C switch indicator on the multi-display.

      Result
      Result Proceed to
      A/C switch indicators are not always illuminated A
      A/C switch indicators are not illuminated only immediately after starting the hybrid engine B

    B
    A
  2. READ VALUE USING GTS (AMBIENT TEMP SENSOR)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Air Conditioner / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Air Conditioner > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Ambient Temp Sensor Thermistor assembly

      Min.: -23.30°C (-9.94°F)

      Max.: 65.95°C (150.71°F)

      Actual ambient temperature displayed

      Thermistor assembly system malfunction


      • When open circuit: -23.30°C (-9.94°F)

      • When short circuit: 65.95°C (150.71°F)


      Body Electrical > Air Conditioner > Data List
      Tester Display
      Ambient Temp Sensor
      OK
      The display is as specified in the normal condition column ( 0°C (32°F) or higher).
      Result
      Proceed to
      OK
      NG

    OK
    NG