FUEL LID OPENER UNIT REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Click here

2. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY

   Click here

3. REMOVE REAR TIRE LH

   Click here

4. REMOVE ROCKER PANEL MOULDING PROTECTOR LH

   Click here

5. REMOVE REAR WHEEL HOUSE LINER LH

   Tech Tips

   Use the same procedure for the RH and LH sides.

   Click here

6. REMOVE FUEL FILLER OPENING LID ASSEMBLY

   
   

   1. 

      Protective Tape

      Apply protective tape around the fuel filler opening lid assembly.

   2. 

      	Protective Tape
      	Remove in this Direction

      Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the claw as shown in the illustration.

   3. Slide in the direction of the arrow shown in the illustration to detach the part (a) at 4 positions and remove the fuel filler opening lid assembly.

7. REMOVE FUEL TANK CAP ASSEMBLY

   
   

   1. 

      Remove in this Direction

      Turn the fuel tank cap assembly in the direction of the arrow shown in the illustration and remove it.

   2. 

      Detach the clamp and remove the fuel tank cap assembly.

8. REMOVE FUEL FILLER OPENING LID SUB-ASSEMBLY

   
   

   1. Remove the fuel inlet box ring as shown in the illustration.

      

      *1

      Fuel Inlet Box Ring

      -

      -

   2. Disconnect the fuel tank filler pipe shield as shown in the illustration.

      
   3. 

      Remove the 4 screws.

   4. 

      Remove in this Direction

      Remove the fuel filler opening lid sub-assembly as shown in the illustration.

   5. Press on the fuel tank filler pipe shield together with the fuel inlet box ring as shown in the illustration.

      

      *1	Fuel Inlet Box Ring	-	-
      	Pull		Push

   6. Pull in the direction of the arrow shown in the illustration and remove the fuel tank filler pipe shield together with the fuel inlet box ring.

   7. 

      *1	Fuel Inlet Box Ring

      Remove the fuel inlet box ring from the fuel tank filler pipe shield.