FRONT CAMERA SYSTEM(for Stereo Camera Type), Diagnostic DTC:C1AA800

DTC Code DTC Name
C1AA800 Front Recognition Camera Optical Axis Misalignment Malfunction

DESCRIPTION

If Object Recognition Camera Learning is not performed after installing the object recognition camera, DTC C1AA800 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AA800 Front Recognition Camera Optical Axis Misalignment Malfunction 3 seconds after the power switch is turned on (IG), the object recognition camera detects an optical axis misalignment.

  • Object recognition camera optical axis adjustment

  • Object recognition camera

CAUTION / NOTICE / HINT

Note


  • When replacing the object recognition camera, always replace it with a new one. If a object recognition camera which was installed to another vehicle is used, the information stored in the object recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

  • If the object recognition camera has been replaced with a new one, be sure to perform Object Recognition Camera Learning.

    Click here

PROCEDURE


  1. PERFORM OBJECT RECOGNITION CAMERA LEARNING


    1. Perform Object Recognition Camera Learning.

      Click here

      OK
      Object Recognition Camera Learning is performed properly.
      Result
      Proceed to
      OK
      NG

    OK

    END

    NG

    REPLACE OBJECT RECOGNITION CAMERA Click here