Click here

FRONT CAMERA SYSTEM(for Stereo Camera Type) DATA LIST / ACTIVE TEST

Click here
Click here
Click here

  1. DATA LIST

    Note:

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tip:

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Front Recognition Camera / Data List.

    5. Read the Data List according to the display on the GTS.


      1. Chassis > Front Recognition Camera > Data List
        Tester Display Measurement Item Range Normal Condition Diagnostic Note
        Total Distance Traveled Total Distance Traveled Min.: 0, Max.: 16777215 - -
        Total Distance Traveled - Unit Total Distance Traveled - Unit km or mile - -
        VGRS ECU Equipped Information VGRS ECU Equipped Information Absence or Presence

        Absence: VGRS system absence

        Presence: VGRS system presence

        		 -
        DRS System Equipped Information DRS System Equipped Information Absence or Presence

        Absence: DRS system absence

        Presence: DRS system presence

        		 -
        Vehicle Information (Steering Wheel Position) Vehicle Information (Steering Wheel Position) Unknown, Left or Right - -
        Front Recognition Camera Low Temperature Low temperature malfunction status Not Low Temperature or Low Temperature Not Low Temperature -
        Front Recognition Camera High Temperature 1 High temperature malfunction (over 85°C (185°F)) status Not High Temperature or High Temperature Not High Temperature -
        Front Recognition Camera High Temperature 2 High temperature malfunction (over 65°C (149°F)) status Not High Temperature or High Temperature Not High Temperature -
        Heater Available Information Object recognition camera internal heater equipped information Absence or Presence

        Absence: Heater unavailable

        Presence: Heater available

        		 -
        Heater Control Permit Object recognition camera internal heater control permission status Not Allow or Allow

        Not Allow: Heater control prohibited

        Allow: Heater control permitted

        		 -
        Heater Control Object recognition camera internal heater control status Not Control or Under Control

        Not Control: Heater not controlled

        Under Control: Heater controlled

        		 -