DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Mono Camera Type) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Radar Cruise 1*1 / Trouble Codes.

    5. Enter the following menus: Powertrain / Radar Cruise 2*2 / Trouble Codes.

    6. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Powertrain > Radar Cruise2 > Trouble Codes

    • *1: Stored in the hybrid vehicle control ECU assembly

    • *2: Stored in the driving support ECU Assembly

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Radar Cruise 1*1 / Clear DTCs.

    5. Enter the following menus: Powertrain / Radar Cruise 2*2 / Clear DTCs.

    6. Clear the DTCs.


      Powertrain > Cruise Control > Clear DTCs
      Powertrain > Radar Cruise2 > Clear DTCs

      • *1: Stored in the hybrid vehicle control ECU assembly

      • *2: Stored in the driving support ECU Assembly