ENGINE OIL COOLER INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install 2 new gaskets to the oil bracket sub-assembly.

   2. Install the oil cooler assembly with the 2 bolts and 2 nuts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

2. Click here

   CONNECT WATER BY-PASS HOSE

   
   

   1. Connect the 2 water by-pass hoses.

3. Click here

   ADD ENGINE OIL

   Click here

4. Click here

   CHECK ENGINE OIL LEVEL

   Click here

5. Click here

   ADD ENGINE COOLANT

   Click here

6. Click here

   INSPECT FOR ENGINE OIL LEAK

   Click here

7. Click here

   INSPECT FOR COOLANT LEAK

   Click here

8. Click here

   INSTALL STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

   Click here

9. Click here

   INSTALL FRONT SUSPENSION MEMBER BRACE

   Click here

10. Click here

    INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

11. Click here

    INSTALL TRANSMISSION UNDER COVER

    Click here

12. Click here

    INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

13. Click here

    INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

14. Click here

    INSTALL LOWER RADIATOR AIR DEFLECTOR

    Click here

15. Click here

    INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

16. Click here

    INSTALL RADIATOR COVER PLATE

    Click here