OIL PUMP COMPONENTS
ILLUSTRATION
| *A | for 2WD | *B | w/ Oil Cooler |
| *C | w/o Oil Cooler | - | - |
| *1 | V-RIBBED BELT | *2 | IGNITION COIL ASSEMBLY |
| *3 | NO. 1 WATER BY-PASS PIPE | *4 | NO. 2 WATER BY-PASS HOSE |
| *5 | NO. 6 WATER BY-PASS HOSE | *6 | OIL FILTER BRACKET SUB-ASSEMBLY |
| *7 | WATER HOSE SUB-ASSEMBLY | *8 | WATER OUTLET |
| *9 | WATER PUMP PULLEY | *10 | O-RING |
| *11 | GASKET | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for AWD | - | - |
| *1 | V-RIBBED BELT | *2 | IGNITION COIL ASSEMBLY |
| *3 | NO. 2 WATER BY-PASS HOSE | *4 | NO. 6 WATER BY-PASS HOSE |
| *5 | OIL FILTER BRACKET SUB-ASSEMBLY | *6 | WATER HOSE SUB-ASSEMBLY |
| *7 | WATER OUTLET | *8 | WATER PUMP PULLEY |
| *9 | O-RING | *10 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CYLINDER HEAD COVER SUB-ASSEMBLY | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY LH |
| *3 | NO. 1 ENGINE COVER | *4 | NO. 1 FUEL TUBE SUB-ASSEMBLY |
| *5 | SPARK PLUG TUBE GASKET | *6 | VVT SENSOR (for Intake Side of Bank 1) |
| *7 | VVT SENSOR (for Exhaust Side of Bank 1) | *8 | VVT SENSOR (for Intake Side of Bank 2) |
| *9 | VVT SENSOR (for Exhaust Side of Bank 2) | *10 | CYLINDER HEAD COVER GASKET |
| *11 | CAMSHAFT BEARING CAP OIL HOLE GASKET | *12 | GASKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for 2WD | - | - |
| *1 | ENGINE OIL LEVEL SENSOR | *2 | NO. 2 OIL PAN SUB-ASSEMBLY |
| *3 | OIL LEVEL SENSOR BRACKET | *4 | OIL PAN SUB-ASSEMBLY |
| *5 | OIL STRAINER SUB-ASSEMBLY | *6 | O-RING |
| *7 | CLIP | *8 | GASKET |
| *9 | OIL PAN DRAIN PLUG | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for AWD | - | - |
| *1 | ENGINE OIL LEVEL SENSOR | *2 | NO. 2 OIL PAN SUB-ASSEMBLY |
| *3 | OIL LEVEL SENSOR BRACKET | *4 | OIL PAN SUB-ASSEMBLY |
| *5 | OIL STRAINER SUB-ASSEMBLY | *6 | OIL WITH STRAINER PIPE SUB-ASSEMBLY |
| *7 | O-RING | *8 | CLIP |
| *9 | GASKET | *10 | OIL PAN DRAIN PLUG |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CRANKSHAFT PULLEY | *2 | TIMING CHAIN CASE OIL SEAL |
| *3 | TIMING CHAIN COVER ASSEMBLY | *4 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1) |
| *5 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1) | *6 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2) |
| *7 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2) | *8 | OIL PUMP GASKET |
| *9 | O-RING | *10 | WIRE HARNESS CLAMP BRACKET |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP grease | ★ | Precoated part |
 |
Do not apply lubricants to the threads parts | - | - |
ILLUSTRATION
| *1 | OIL PUMP COVER | *2 | DRIVEN ROTOR |
| *3 | DRIVE ROTOR | *4 | OIL PUMP RELIEF VALVE |
| *5 | TIMING CHAIN COVER ASSEMBLY | *6 | RELIEF VALVE SPRING |
| *7 | RELIEF VALVE PLUG | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |