EXHAUST MANIFOLD COMPONENTS

*A for 2WD *B for AWD *1 AIR CLEANER WITH AIR CLEANER HOSE *2 ENGINE OIL LEVEL DIPSTICK GUIDE *3 FENDER APRON BRACE SUB-ASSEMBLY LH *4 FENDER APRON BRACE SUB-ASSEMBLY RH *5 FRONT FENDER APRON INSULATOR LH *6 LOWER RADIATOR AIR DEFLECTOR *7 NO. 1 AIR CLEANER INLET *8 NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE *9 RADIATOR COVER PLATE *10 RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY LH *11 RADIATOR SUPPORT TO CROSSMEMBER BRACE SUB-ASSEMBLY RH *12 UPPER RADIATOR SUPPORT SEAL *13 V-BANK COVER SUB-ASSEMBLY *14 O-RING *15 ENGINE OIL LEVEL DIPSTICK - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part

*A for 2WD *B for AWD *1 FRONT SUSPENSION MEMBER BRACE *2 NO. 1 ENGINE UNDER COVER ASSEMBLY *3 NO. 2 ENGINE UNDER COVER ASSEMBLY *4 STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY *5 TRANSMISSION UNDER COVER - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part ★ Precoated part - -

*1 ENGINE SIDE COVER RH *2 FLOOR BOARD SUB-ASSEMBLY *3 FRONT CENTER FLOOR BRACE SUB-ASSEMBLY *4 NO. 2 FLOOR BOARD SUB-ASSEMBLY *5 REAR FLOOR SIDE MEMBER COVER LH *6 REAR FLOOR SIDE MEMBER COVER RH *7 REAR LOWER ARM MOUNTING REINFORCEMENT SUB-ASSEMBLY RH - - N*m (kgf*cm, ft.*lbf): Specified torque - -

*A for 2WD - - *1 EXHAUST MANIFOLD ASSEMBLY LH *2 EXHAUST MANIFOLD ASSEMBLY RH *3 FRONT EXHAUST PIPE ASSEMBLY *4 NO. 1 EGR PIPE *5 NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY *6 GASKET *7 COMPRESSION SPRING - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part

*A for AWD - - *1 EXHAUST MANIFOLD ASSEMBLY LH *2 EXHAUST MANIFOLD ASSEMBLY RH *3 FRONT EXHAUST PIPE ASSEMBLY *4 NO. 1 EGR PIPE *5 NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY *6 GASKET *7 COMPRESSION SPRING - - N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part

*A for 2WD - - *1 AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) *2 AIR FUEL RATIO SENSOR (for Bank 1 Sensor 2) *3 AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) *4 AIR FUEL RATIO SENSOR (for Bank 2 Sensor 2) *5 NO. 1 EXHAUST MANIFOLD HEAT INSULATOR *6 NO. 1 MANIFOLD CONVERTER INSULATOR *7 NO. 2 MANIFOLD CONVERTER INSULATOR - - N*m (kgf*cm, ft.*lbf): Specified torque * For use with SST

*A for AWD - - *1 AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) *2 AIR FUEL RATIO SENSOR (for Bank 1 Sensor 2) *3 AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) *4 AIR FUEL RATIO SENSOR (for Bank 2 Sensor 2) *5 NO. 1 EXHAUST MANIFOLD HEAT INSULATOR *6 NO. 1 MANIFOLD CONVERTER INSULATOR *7 NO. 2 MANIFOLD CONVERTER INSULATOR - - N*m (kgf*cm, ft.*lbf): Specified torque * For use with SST