FUEL SENDER GAUGE ASSEMBLY INSTALLATION

PROCEDURE

1. Click here

   INSTALL FUEL SENDER GAUGE ASSEMBLY

   
   
   1. 

      Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

   2. Connect the fuel sender gauge assembly connector.

2. Click here

   INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

   Click here

3. Click here

   INSTALL FUEL TANK VENT TUBE SET PLATE

   Click here

4. Click here

   CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

   Click here

5. Click here

   INSTALL NO. 2 REAR FLOOR SERVICE HOLE COVER

   Click here

6. Click here

   INSTALL NO. 2 FUEL SENDER GAUGE ASSEMBLY

   
   

   1. Install the No. 2 fuel sender gauge assembly to the fuel tank assembly with the 5 screws.

      1.5 N*m

      15 kgf*cm

      13 in.*lbf

7. Click here

   INSTALL NO. 1 REAR FLOOR SERVICE HOLE COVER

   
   

   1. Connect the No. 2 fuel sender gauge assembly connector.

   2. Install the No. 1 rear floor service hole cover with new butyl tape.

8. Click here

   CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. Click here

   INSPECT FOR FUEL LEAK

   Click here

10. Click here

    INSTALL REAR SEAT CUSHION ASSEMBLY

    
    

    • for Power Seat:

      Click here

    • for Fixed Seat Type:

      Click here