BATTERY ECU INSTALLATION

PROCEDURE


  1. INSTALL BATTERY ECU ASSEMBLY

    CAUTION:

    Be sure to wear insulated gloves and protective goggles.


    1. B004UWY

      Install the battery ECU assembly with the 2 nuts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note


      • Do not drop the battery ECU assembly, strike it with tools or subject it to impact.

      • If the battery ECU assembly is subjected to an impact, replace it with a new one.

    2. Connect the 2 connectors.

      Note

      Make sure that the connector is connected securely.

  2. INSTALL BATTERY VOLTAGE SENSOR (for Upper Side)

    Click here

  3. INSTALL UPPER NO. 1 HYBRID BATTERY COVER SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 2 HYBRID BATTERY SHIELD SUB-ASSEMBLY

    Click here

  6. INSTALL UPPER HV BATTERY COVER PANEL

    Click here

  7. INSTALL HV BATTERY ASSEMBLY

    Click here

  8. CURRENT SENSOR OFFSET LEARNING

    Tech Tips

    Perform this procedure when the HV battery junction block assembly or battery ECU assembly has been replaced.

    Click here