Click here

MOTOR GENERATOR CONTROL SYSTEM, Diagnostic DTC:P062F46

Click here
Click here
DTC Code DTC Name
P062F46 Generator Control Module(EEPROM Learning Value) Calibration / Parameter Memory Failure
Click here

DESCRIPTION

The inverter with converter assembly monitors its internal operation and will store this DTC if it detects a malfunction of its EEPROM.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P062F46 Generator Control Module(EEPROM Learning Value) Calibration / Parameter Memory Failure

ECU internal malfunction

(EEPROM error)

(1 trip detection logic)

 Inverter with converter assembly Comes on

Master Warning Light:

Comes on
Click here

CONFIRMATION DRIVING PATTERN

Tip:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. With power switch on (IG) and wait for 15 seconds or more.

  7. Enter the following menus: Powertrain / Motor Generator / Utility / All Readiness.

  8. Check the DTC judgment result.

    Tip:

    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE, perform driving pattern again.

Click here

PROCEDURE


  1. Click here

    REPLACE INVERTER WITH CONVERTER ASSEMBLY

    Click here

    Result
    Proceed to
    NEXT

    • NEXT

      COMPLETED