Click here

HYBRID CONTROL SYSTEM, Diagnostic DTC:P0A1F94

Click here
Click here
DTC Code DTC Name
P0A1F94 Hybrid/EV Battery Energy Control Module Unexpected Operation
Click here

DTC SUMMARY


Click here

  1. MALFUNCTION DESCRIPTION

    The hybrid vehicle control ECU assembly (main CPU) monitors the battery ECU assembly.

    The cause of this malfunction may be the following:


    • Battery ECU assembly internal malfunction

    • Battery ECU assembly malfunction

Click here

DESCRIPTION

The hybrid vehicle control ECU assembly (main CPU) monitors the battery ECU assembly and stores this DTC when it detects a malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P0A1F94 Hybrid/EV Battery Energy Control Module Unexpected Operation

The battery ECU assembly value received by the hybrid vehicle control ECU assembly (main CPU) exceeds the threshold for a certain period of time.

(1 trip detection logic)

 Battery ECU assembly Comes on

Master Warning Light:

Comes on
Click here

CONFIRMATION DRIVING PATTERN

Tip:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click here


  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG) and turn the GTS on.

  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

  4. Turn the power switch off and wait for 2 minutes or more.

  5. Turn the power switch on (IG) and turn the GTS on.

  6. Turn the power switch on (READY) and wait for 10 seconds or more.

  7. Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

  8. Read the current DTCs.

    Tip:

    • If the judgment result shows NORMAL, the system is normal.

    • If the judgment result shows ABNORMAL, the system has a malfunction.

    • If the judgment result shows INCOMPLETE, perform driving pattern again.

Click here

PROCEDURE


  1. Click here

    CHECK DTC OUTPUT (HYBRID CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

    4. Check for DTCs.


      1. Powertrain > Hybrid Control > Trouble Codes


      Result
      Proceed to
      P0A1F94 only is output.
      DTCs except P0A1F94 are output.

    5. Turn the power switch off.


    • P0A1F94 only is output.

      REPLACE BATTERY ECU ASSEMBLYClick here

    • DTCs except P0A1F94 are output.

      GO TO DTC CHART (HYBRID CONTROL SYSTEM)Click here