ENGINE COOLANT TEMPERATURE SENSOR INSPECTION

PROCEDURE


  1. INSPECT E.F.I. ENGINE COOLANT TEMPERATURE SENSOR


    1. B004T1IC08
      *a

      Component without harness connected

      (E.F.I. Engine Coolant Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      D21-1 - D21-2 20°C (68°F) 2.32 to 2.59 kΩ
      80°C (176°F) 0.310 to 0.326 kΩ

      Note

      If checking the E.F.I. engine coolant temperature sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the E.F.I. engine coolant temperature sensor.