CRANKSHAFT POSITION SENSOR REMOVAL

PROCEDURE

1. Click here

   REMOVE TRANSMISSION UNDER COVER (for 2WD)

   Click here

2. Click here

   REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD)

   Click here

3. Click here

   REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for AWD)

   Click here

4. Click here

   REMOVE CRANKSHAFT POSITION SENSOR

   
   
   1. 

      Disconnect the crankshaft position sensor connector.

   2. Remove the bolt and crankshaft position sensor.

      Note:

      If the crankshaft position sensor has been struck or dropped, replace it.