MASS AIR FLOW METER INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

   Tip:

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   
   

   • w/ Canister Pump Module:

     Click here

   • w/o Canister Pump Module:

     Click here

   
   

   1. Install the mass air flow meter sub-assembly with the 2 screws.

      Note:
      

      • If the mass air flow meter sub-assembly has been struck or dropped, replace it.

      • If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

      • Make sure that the O-ring is not cracked or does not move out of place during installation.

   2. Connect the mass air flow meter sub-assembly connector.

2. Click here

   INSTALL LOWER RADIATOR AIR DEFLECTOR

   Click here

3. Click here

   INSTALL UPPER RADIATOR SUPPORT SEAL

   Click here

4. Click here

   INSTALL RADIATOR COVER PLATE

   Click here