CAMSHAFT OIL CONTROL SOLENOID(for Bank 1) REMOVAL

PROCEDURE

1. Click here

   REMOVE V-BANK COVER SUB-ASSEMBLY

   Click here

2. Click here

   REMOVE RADIATOR COVER PLATE

   Click here

3. Click here

   REMOVE UPPER RADIATOR SUPPORT SEAL

   Click here

4. Click here

   REMOVE LOWER RADIATOR AIR DEFLECTOR

   Click here

5. Click here

   REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)

   
   
   1. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   2. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note:

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   3. 

      Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note:
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.

6. Click here

   REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)

   
   
   1. 

      Detach the 2 clamps.

   2. Remove the nut to disconnect the engine wire.

   3. Remove the 4 bolts and wiring harness clamp bracket.

   4. 

      Disconnect the camshaft timing oil control solenoid assembly connector.

   5. Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

      Note:

      If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

   6. 

      Remove the O-ring from the camshaft timing oil control solenoid assembly.

      Note:
      

      • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.

      • Do not drop the O-ring into the timing chain cover assembly.