CAMSHAFT OIL CONTROL VALVE(for Bank 1) ON-VEHICLE INSPECTION

Click here Click here

PROCEDURE

1. Click here

   REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

   Click here

2. Click here

   INSPECT CAMSHAFT TIMING GEAR BOLT

   
   
   1. 

      *a	Plunger
      *b	Intake Side
      *c	Exhaust Side

      Check the stroke of the plunger in the center of the camshaft timing gear bolt.

      Standard Stroke
      2.2 mm (0.0866 in.) or more

      Tip:

      When pressing the plunger, there may be a stepped feeling. This is not a malfunction.

3. Click here

   INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

   Click here