Click here

CONTROL VALVE ASSEMBLY(for Rear Side) INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY


    1. B004RE1C04
      *a

      Component without harness connected

      (No. 2 Height Control Valve Sub-assembly)

      Measure the resistance according to the value(s) in the table.

      Table 1. Standard resistance:
      Tester Connection Condition Specified Condition
      L177-1 (RH+) - L177-2 (E) at 20°C (68°F) 9.36 to 10.14 Ω
      L177-3 (LH+) - L177-2 (E)
      Tip:

      If the result is not as specified, replace the No. 2 height control valve sub-assembly.

    2. B004RE1C05
      *a

      Component without harness connected

      (No. 2 Height Control Valve Sub-assembly)

      Check the operating sound of the height control valve when battery voltage is applied to the terminals.

      OK
      Tester Connection Specified Condition
      L177-1 (RH+) - L177-2 (E) Sound of No. 2 height control valve operating can be heard
      L177-3 (LH+) - L177-2 (E)
      Tip:

      If the result is not as specified, replace the No. 2 height control valve sub-assembly.