Click here

CONTROL VALVE ASSEMBLY(for Rear Side) REMOVAL

Click here
Click here Click here

CAUTION / NOTICE / HINT

Note:

  • Be sure to read the "PRECAUTION" thoroughly before servicing.

    Click here

  • In order to prevent the battery from becoming fully depleted, connect the battery charger to the auxiliary battery when turning the power switch on (IG) to charge the battery.

  • Keep the power supply connected to prevent the GTS battery from becoming fully depleted.

Tip:

Make sure to identification marks on the height control tube before removing them to prevent improper installation during reinstallation.

Click here

PROCEDURE


  1. Click here

    AIR SUSPENSION CONTROL PROHIBITED

    Click here

  2. Click here

    REMOVE REAR WHEEL RH

    Click here

  3. Click here

    REMOVE ROCKER PANEL MOULDING PROTECTOR RH


    1. B004U6N

      Remove the 2 screws, clip and rocker panel moulding protector RH.

  4. Click here

    REMOVE REAR WHEEL HOUSE LINER RH


    1. B004RWTC01
      B004SZX Nut B004UK4 Screw
      B004XCB clip B004SCA Grommet

      Remove the 3 screws, 4 clips, 11 nuts, grommet and rear wheel house liner RH.

  5. Click here

    INSTALL NO. 2 HEIGHT CONTROL VALVE SUB-ASSEMBLY


    1. B004RP7

      Disconnect the connector.

    2. B004YQ2C01
      *1 No. 6 Height Control Tube
      *2 No. 7 Height Control Tube
      *3 No. 8 Height Control Tube
      *4 No. 9 Height Control Tube

      Using SST, disconnect the No. 6 height control tube.

      09730-00020

      Click here

    3. Using SST, disconnect the No. 7 height control tube.

      09730-00020

      Click here

    4. Using SST, disconnect the No. 8 height control tube.

      09730-00020

      Click here

    5. Using SST, disconnect the No. 9 height control tube.

      09730-00020

      Click here

    6. B004RAJ

      Detach the clamp and disconnect the No. 2 height control valve sub-assembly.

    7. Remove the 2 nuts and No. 2 height control valve sub-assembly.

    8. B004RYGC01
      *1 No. 1 Height Control Valve Bush
      *2 No. 2 Height Control Valve Cushion

      Remove the 2 No. 1 height control valve bushes and No. 2 height control valve cushions from the No. 2 height control valve sub-assembly.