CONTROL VALVE ASSEMBLY(for Front Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 HEIGHT CONTROL VALVE SUB-ASSEMBLY


    1. B004RE1C06
      *a

      Component without harness connected

      (No. 1 Height Control Valve Sub-assembly)

      Measure the resistance according to the value(s) in the table.

      Standard resistance:
      Tester Connection Condition Specified Condition
      A38-1 (RH+) - A38-2 (E) at 20°C (68°F) 9.36 to 10.14 Ω
      A38-3 (LH+) - A38-2 (E)

      Tech Tips

      If the result is not as specified, replace the No. 1 height control valve sub-assembly.

    2. B004RE1C07
      *a

      Component without harness connected

      (No. 1 Height Control Valve Sub-assembly)

      Check the operating sound of the height control valve when battery voltage is applied to the terminals.

      OK
      Tester Connection Specified Condition
      A38-1 (RH+) - A38-2 (E) Sound of No. 1 height control valve operating can be heard
      A38-3 (LH+) - A38-2 (E)

      Tech Tips

      If the result is not as specified, replace the No. 1 height control valve sub-assembly.