Click here

HEIGHT CONTROL WAY INSPECTION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSPECT HEIGHT CONTROL WAY


    1. B004XQ2C01
      *a

      Component without harness connected

      (Height control way)

      Check the height control way output voltage.

      Standard Voltage
      Tester Connection Condition Specified Condition
      A42-2 (PAC2) -A42-3 (SHB) Apply 5 V between terminals 1 (SHG) and 3 (SHB). 0.5 to 4.5 V
      Tip:

      • If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.

      • If the result is not as specified, replace the height control way.