Click here

HEIGHT CONTROL WAY REMOVAL

Click here
Click here Click here

CAUTION / NOTICE / HINT

Note:

Be sure to read the "PRECAUTION" thoroughly before servicing.

Click here

Click here

PROCEDURE


  1. Click here

    REMOVE FRONT WHEEL RH

    Click here

  2. Click here

    REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 2WD)

    Click here

  3. Click here

    REMOVE TRANSMISSION UNDER COVER (for 2WD)

    Click here

  4. Click here

    REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD)

    Click here

  5. Click here

    REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for AWD)

    Click here

  6. Click here

    REMOVE ENGINE SIDE COVER RH (for 2WD)


    1. B004RHO

      Remove the 4 clips.

    2. Detach the claw and remove the engine side cover RH.

  7. Click here

    REMOVE FRONT FENDER WHEEL OPENING MOULDING RH


    1. B004TM2C01
      B004SZX Thin-bladed Screwdriver Insertion Position

      Detach the 3 claws and remove the front fender wheel opening moulding RH.

      Tip:

      Insert a thin-bladed screwdriver from the vehicle side and bend the claw to remove it.

  8. Click here

    REMOVE FRONT FENDER LINER RH


    1. B004TXRC01
      B004SZX clip B004UK4 screw

      Remove the 11 screws, 13 clips and front fender liner RH.

  9. Click here

    REMOVE HEIGHT CONTROL WAY


    1. B004U0QC01
      *1 No. 8 Height Control Tube
      *2 Rear No. 8 Height Control Tube

      Disconnect the connector.

    2. Disconnect the No. 8 height control tube and rear No. 8 height control tube.

      09730-00020

      Click here

    3. B004T39

      Remove the bolt and height control way.