PNEUMATIC TANK REMOVAL

CAUTION / NOTICE / HINT

Note


  • Be sure to read the "PRECAUTION" thoroughly before servicing.

    Click here

  • In order to prevent the battery from becoming fully depleted, connect the battery charger to the auxiliary battery when turning the power switch on (IG) to charge the battery.

  • Keep the power supply connected to prevent the GTS battery from becoming fully depleted.

PROCEDURE


  1. AIR SUSPENSION CONTROL PROHIBITED

    Click here

  2. REMOVE NO. 1 FLOOR UNDER COVER

    Click here

  3. REMOVE BATTERY CARRIER CATCH BRACKET SUB-ASSEMBLY

    Click here

  4. REMOVE BRAKE CONTROL POWER SUPPLY WITH BRACKET ASSEMBLY

    Click here

  5. DISCONNECT NO. 5 HEIGHT CONTROL TUBE


    1. B004TFQ

      Disconnect the connector.

    2. Disconnect the harness clamp.

    3. Disconnect the No. 5 height control tube from the pneumatic tank with tube assembly.

      SST
      09730-00020

      Click here

    4. Disconnect the clamp.

  6. REMOVE PNEUMATIC TANK WITH TUBE ASSEMBLY


    1. B004TMF

      Remove the 3 bolts and pneumatic tank with tube assembly.

  7. REMOVE HEIGHT CONTROL PRESSURE SENSOR


    1. B004SLI

      Remove the height control pressure sensor from the pneumatic tank with tube assembly.

    2. Remove the O-ring from the height control pressure sensor.

  8. REMOVE NO. 5 HEIGHT CONTROL TUBE


    1. B004RO7

      Disconnect the clamp.

    2. B004Y7Z

      Disconnect the No. 5 height control tube from the No. 3 height control valve assembly.

      SST
      09730-00020

      Click here

    3. B004SI6

      Disconnect the No. 5 height control tube grommet from the lower side of the vehicle (exterior).

    4. Remove the No. 5 height control tube from inside the trunk room.

      Note

      Do not damage the end of the height control tube on the body hole.