REAR BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Note

If the left and right rear flexible hoses are disconnected at the same time, be sure to place an identification mark on each hose to indicate its installation position.

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. DISCONNECT BRAKE BOOSTER PUMP CONNECTOR

    Click here

  2. REMOVE REAR WHEEL

    Click here

  3. DRAIN BRAKE FLUID

    Note

    If brake fluid leaks onto any painted surface, immediately wash it off.

  4. REMOVE REAR FLEXIBLE HOSE


    1. B004RNC

      Remove the union bolt and gasket, and disconnect the rear flexible hose from the rear disc brake cylinder assembly LH.

    2. B004YBT

      Using a union nut wrench, disconnect the brake tube while holding the rear flexible hose with a wrench.

      Note


      • Do not kink or damage the brake tube.

      • Do not allow any foreign matter such as dirt or dust to enter the brake tube from the connecting parts.

    3. Remove the clip and rear flexible hose.