AIR SUSPENSION SYSTEM DTC CHECK / CLEAR

CHECK FOR DTC

1. Turn the power switch off.

2. Connect the GTS to the DLC3.

3. Turn the power switch on (IG).

4. Turn the GTS on.

5. Enter the following menus: Chassis / Air suspension / Trouble Codes.

   
   
   1. Chassis > Air suspension > Trouble Codes
   2. 
      
   3. 
      
   Tip:

   When freeze frame data is stored, check the freeze frame data.

   Click here

6. Read the DTCs by following the prompts on the GTS screen.

   Tip:

   Refer to the GTS operator's manual for further details.

7. Refer to Diagnostic Trouble Code Chart for DTC information.

   Click here

CLEAR DTC

1. Turn the power switch off.

2. Connect the GTS to the DLC3.

3. Turn the power switch on (IG).

4. Turn the GTS on.

5. Enter the following menus: Chassis / Air suspension / Trouble Codes.

   
   
   1. Chassis > Air suspension > Clear DTCs
   2. 
      
   3. 
      
   Note:

   DTCs and freeze frame data are cleared at the same time.

6. Clear the DTCs by following the prompts on the GTS screen.

   Tip:

   Refer to the GTS operator's manual for further details.