Click here

DIFFERENTIAL MOUNT CUSHION INSTALLATION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. B004VK4C01
      *a SST (09570-48010) *b SST (09570-24011)
      *c 0° +/- 3° - -
      B004SZX SST bolt location B004UK4 Front of the Vehicle

      Using SST, install a new rear No. 1 differential mount cushion.

      09570-24011
      09570-48010
      Note:

      • Make sure that the rear No. 1 differential mount cushion is aligned within 3° from the center.

      • Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      Tip:

      Install the 2 SST bolts to the 2 SST holes as shown in the illustration.

  2. Click here

    INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY