DIFFERENTIAL MOUNT CUSHION REMOVAL

PROCEDURE

1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

   
   

   • for 2WD:

     Click here

   • for AWD:

     Click here

2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

   
   

   1. Using SST, remove the rear No. 1 differential mount cushion.

      SST

      09570-24011

      09570-60010

      

      *a	SST (09570-24011)	*b	SST (09570-60010)
      	SST bolt location		Front of the Vehicle

      Note

      
      

      • Before using SST, apply grease to the SST bolts.

      • Be sure to use the correct combination of SST.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      Tech Tips

      Install the 2 SST bolts to the 2 SST holes as shown in the illustration.