TRANSFER ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT TRANSFER FR DRIVE GEAR ASSEMBLY


    1. B004SXQN01

      Using a micrometer, measure the outer diameter of the front transfer drive gear journal.

      Maximum
      Measurement Area When New [mm] Minimum [mm]
      A 50.981 to 51.000 mm (2.0072 to 2.0078 in.) 50.981 mm (2.0072 in.)
      B 54.461 to 54.480 mm (2.1442 to 2.1448 in.) 54.461 mm (2.1442 in.)
      C 74.461 to 74.480 mm (2.9316 to 2.9322 in.) 74.461 mm (2.9316 in.)

      Tech Tips

      If the outer diameter is less than the minimum, replace the transfer front drive gear assembly.

  2. INSPECT TRANSFER INPUT SHAFT


    1. B004VB6N01

      Using a micrometer, measure the outer diameter of the transfer input shaft journal.

      Maximum
      Measurement Area When New [mm] Minimum [mm]
      A 47.975 to 48.000 mm (1.8888 to 1.8897 in.) 47.975 mm (1.8888 in.)
      B 50.750 to 50.870 mm (1.9981 to 2.0027 in.) 50.750 mm (1.9981 in.)
      C 34.961 to 34.986 mm (1.3765 to 1.3774 in.) 34.961 mm (1.3765 in.)
      D 17.980 to 18.000 mm (0.7079 to 0.7086 in.) 17.980 mm (0.7079 in.)

      Tech Tips

      If the outer diameter is less than the minimum, replace the transfer input shaft.