FRONT PROPELLER SHAFT ASSEMBLY REMOVAL

PROCEDURE

1. Click here

   REMOVE FRONT EXHAUST PIPE ASSEMBLY

   Click here

2. Click here

   REMOVE NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY

   Click here

3. Click here

   LOOSEN FRONT PROPELLER SHAFT ASSEMBLY

   
   
   1. 

      *a

      Matchmark

      Put matchmarks on the transfer companion flange and front propeller shaft.

   2. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note:

      To prevent the front propeller shaft assembly from falling, only loosen the bolts. Do not remove them.

   3. 

      *a

      Matchmark

      Put matchmarks on the front differential companion flange and front propeller shaft.

   4. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note:

      To prevent the front propeller shaft assembly from falling, only loosen the bolts. Do not remove them.

4. Click here

   REMOVE REAR ENGINE MOUNTING MEMBER

   
   
   1. 

      Support the transfer assembly with a transmission jack.

      Note:

      Do not install the adjustable attachment and plate lift attachment to the transmission oil pan.

   2. 

      Remove the 6 bolts.

   3. 

      Remove the 5 nuts and rear engine mounting member, and remove the rear engine mounting member from the automatic transmission assembly.

5. Click here

   REMOVE FRONT PROPELLER SHAFT ASSEMBLY

   
   

   1. Remove the 12 bolts, 4 universal joint washers.

   2. Remove the front propeller shaft assembly from the companion flanges.

      Note:

      Do not bend the front propeller shaft at an excessive angle.