PARKING LOCK RELEASE CABLE REMOVAL

PROCEDURE


  1. AIR SUSPENSION CONTROL PROHIBITED (w/ Air Suspension)

    Click here

  2. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

    Click here

  3. REMOVE NO. 2 PARKING LOCK RELEASE CABLE ASSEMBLY


    1. B004TQRC01
      B004SZX Bolt
      B004UK4 Nut and Spring Washer

      Remove the nut, spring washer and 2 bolts and disconnect the No. 2 parking lock release cable assembly from the shift control actuator assembly.

    2. B004XQJC01
      *1 Cover
      B004RMI Disconnect

      Detach the 2 claws and disconnect the cover from the No. 2 parking lock release cable assembly as shown in the illustration.

    3. B004UGNC01
      *1 Parking Lock Release Lever Assembly Cable End
      *2 No. 2 Parking Lock Release Cable Assembly Cable End

      Disconnect the parking lock release lever assembly cable end from the No. 2 parking lock release cable assembly cable end.

    4. B004TT6

      Remove the 2 bolts and No. 2 parking lock release cable assembly from the No. 2 parking release cable bracket sub-assembly.

  4. REMOVE TRANSMISSION CONTROL SHAFT LEVER


    1. B004US5

      Remove the nut, spring washer and transmission control shaft lever from the No. 2 parking lock release cable assembly.

  5. REMOVE PARKING LOCK RELEASE LEVER ASSEMBLY


    1. B004XXX

      Remove the nut and No. 1 parking lock release cable clamp bracket from the body.

    2. B004X23C01
      *a Protector

      Remove the No. 1 parking lock release cable clamp bracket from the parking lock release lever assembly protector.

    3. B004TVYC02
      *A for LHD
      *B for RHD

      Remove the 4 bolts and pull out the parking lock release lever assembly from the floor panel through holes to remove it.

      Tech Tips


      • Do not damage the cable with the floor panel through holes.

      • Do not bend the cable.

  6. REMOVE NO. 2 PARKING RELEASE CABLE BRACKET SUB-ASSEMBLY

    Tech Tips

    Perform this procedure only when replacing the No. 2 parking release cable bracket sub-assembly.


    1. B004XX5

      Remove the 2 nuts and No. 2 parking release cable bracket sub-assembly from the engine rear mounting member.