ELECTRONIC SHIFT LEVER SYSTEM

CHECK FOR DTCS (HYBRID CONTROL)

Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
1. Powertrain > Hybrid Control > Trouble Codes

Check for DTCs and freeze frame data, and then write them down.

Tip:

GTS Display	Description
Test Failed	Shows the malfunction judgment results during the current trip.
Pending	Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
Confirmed	Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

Test Failed DTC, Pending DTC and Confirmed DTC are record freeze frame data respectively.

CHECK FREEZE FRAME DATA
1. If a DTC is present, select it in order to display its freeze frame data.
2. Read the freeze frame data recorded when the DTC was stored.
CHECK TIME STAMP

Tip:
By checking Time Stamp, the time and order in which DTCs were stored in an ECU can be checked.
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Health Check.
5. Perform the following steps when the data setting screen is displayed.
6. Select the systems for which to perform Health Check and check for time stamp data.
  - Selectable items:
  - Powertrain
  - Chassis
  - Body
  - Store All Data
7. Select "Yes" when "Do you want to store time stamp data?" is displayed.
  
  Tip:
  If "Yes" is not selected, time stamp data will not be stored.
8. After Health Check has completed, select "Time Stamp Data" to display the Time Stamp screen.
9. Select the desired system from the drop-down list on the bottom of the Time Stamp screen.
10. Check the order and time which DTCs were stored for the selected system.
CHECK FOR DTCS (CAN BUS CHECK)
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: CAN Bus Check.
  1. CAN Bus Check
5. Check for CAN communication system DTCs.
  
  Tip:
  If any CAN communication system DTCs are output, perform troubleshooting for the CAN communication system first.
  
  Click here
CHECK FOR DTCS (EXCEPT HYBRID CONTROL)

Tip:
The shift control ECU maintains communication with other ECUs. Therefore, if the DTC related electronic shift lever system is output, it is necessary to check and record the DTCs of all systems.
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Health Check.
5. If DTCs are output, check the relevant systems.
  
  Tip:
  If DTCs for the CAN communication system are present in addition to other DTCs, first troubleshoot and repair any malfunctions in the CAN communication system.
CLEAR DTCS

Note:
Clearing the DTCs will also clear the freeze frame data.
1. Connect the GTS to the DLC3.
2. Turn the power switch on (IG).
3. Turn the GTS on.
4. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
5. Clear the DTCs and freeze frame data.
  1. Powertrain > Hybrid Control > Clear DTCs

ELECTRONIC SHIFT LEVER SYSTEM DTC CHECK / CLEAR