MILLIMETER WAVE RADAR SENSOR REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET (for Stereo Camera Type)


    1. B004RH3C02
      *a Guide
      B004SZX Screw
      B004UK4 Bolt

      Attach the guide.

    2. Temporarily install the No. 1 millimeter wave radar sensor bracket with the 2 bolts and screw.

    3. Tighten the 2 bolts and screw in the order shown in the illustration.

      Torque:
      Bolt
      2.5 N*m  { 25 kgf*cm, 22 in.*lbf }

  2. INSTALL NO. 1 MILLIMETER WAVE RADAR SENSOR BRACKET (for Mono Camera Type)

    Note

    If the No. 1 millimeter wave radar sensor bracket has been removed/installed, be sure to perform adjustment.


    1. B004X7SN01

      Temporarily install the No. 1 millimeter wave radar sensor bracket with the 2 screws.

    2. Tighten the 2 screws and in the order shown in the illustration.