Click here

FRONT RADAR SENSOR SYSTEM(for Stereo Camera Type) UTILITY

Click here
Click here
Note:

  • When replacing a millimeter wave radar sensor assembly, replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle and a DTC may be stored.

  • If the millimeter wave radar sensor assembly has been replaced, it is necessary to perform Front Beam Axis Adjustment of the millimeter wave radar sensor assembly.

    Click here


Click here

  1. Front Beam Axis Adjustment

    Tip:

    Front Beam Axis Adjustment is used to calibrate the beam axis of millimeter wave radar sensor assembly.


    1. Perform Front Beam Axis Adjustment according to the display on the GTS.

      Click here


      1. Body Electrical > Front Radar Sensor > Utility
        Tester Display
        Front Beam Axis Adjustment




  2. Tip:

    Front Beam Axis Misalignment Reading is used to check the amount of misalignment of the millimeter wave radar sensor assembly.

    Front Beam Axis Misalignment Reading


    1. Perform Front Beam Axis Misalignment Reading according to the display on the GTS.

      Click here


      1. Body Electrical > Front Radar Sensor > Utility
        Tester Display
        Front Beam Axis Misalignment Reading




  3. Front Radar Acceleration Sensor Calibration

    Tip:

    Front Radar Acceleration Sensor Calibration is used to perform calibration of the acceleration sensor in the millimeter wave radar sensor assembly.


    1. Perform Front Radar Acceleration Sensor Calibration according to the display on the GTS.


      1. Body Electrical > Front Radar Sensor > Utility
        Tester Display
        Front Radar Acceleration Sensor Calibration