Click here

FRONT CAMERA(for Mono Camera Type) INSTALLATION

Click here
Click here Click here

PROCEDURE


  1. Click here

    INSTALL FORWARD RECOGNITION CAMERA

    Note:

    • When replacing the forward recognition camera, replace it with a new one.

    • If the forward recognition camera has been struck or dropped, replace it with a new one.

    • If the forward recognition camera is not properly installed, forward recognition camera optical axis learning cannot be performed properly. Make sure the forward recognition camera is installed securely.

    • Do not touch the lens when replacing the forward recognition camera.

    • Replace the forward recognition camera if there is any foreign matter on the camera lens.

    • If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

    • When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Lexus genuine part. If a non-Lexus genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the Dynamic radar cruise control system (for Mono camera type), front camera system (for Mono camera type), LKA/LDA system (for Mono camera type), road sign assist system (for Mono camera type), pre-collision system (for Mono camera type) or automatic high beam system not operate properly due to a difference in the transmissivity or black ceramic border.

    • If there is any foreign matter on the area of the windshield glass in front of the forward recognition camera, clean the windshield glass before installing the forward recognition camera.

    • Do not touch the hood when replacing the forward recognition camera.


    1. B004S1M

      When using a new forward recognition camera:


      1. Remove the protective film.

        Note:

        Do not touch the camera lens after removing the protective film.

    2. B004YOSC01
      B004RMI Install in this Direction

      Attach the guide to install the forward recognition camera as shown in the illustration.

      Note:

      Do not touch the camera lens.

    3. Connect the connector.

  2. Click here

    INSTALL FORWARD RECOGNITION LATCH

    Note:

    Before installing the forward recognition latch, be sure to check that the forward recognition camera is securely installed.


    1. B004U8UC01
      *a Securely attach the Claw.
      B004RMI Install in this Direction

      Attach the guide and claw as shown in the illustration to install the forward recognition latch.

      Note:

      Check that the forward recognition latch is securely installed.

  3. Click here

    INSTALL NO. 1 FORWARD RECOGNITION COVER


    1. B004UCFC01
      B004RMI Install in this Direction

      Attach the guide and clip as shown in the illustration to install the No. 1 forward recognition cover.

      Note:

      When installing, press the cover parallel to the windshield glass surface and install.

      Tip:

      Check the locking sound of the clip when attaching it.

  4. Click here

    INSTALL NO. 2 FORWARD RECOGNITION COVER


    1. B004TCPC01
      B004RMI Install in this Direction(1)
      B004T3S Install in this Direction(2)

      Attach the guide the direction indicated by the arrow (1) shown in the illustration.

      Note:

      Insert the guide all the way.

    2. Rotate the guide around the shaft and attach the claw in the installation direction (2) shown in the illustration to install the No. 2 forward recognition cover.

      Note:

      If the claw are attached separately they may become damaged. Therefore, attach them at the same time.

  5. Click here

    INSTALL FRONT ROOF TOP GARNISH

    Click here

  6. Click here

    ADJUST FORWARD RECOGNITION CAMERA


    1. If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera learning.

      Click here