ROAD SIGN ASSIST SYSTEM(for Stereo Camera Type) TERMINALS OF ECU


  1. CHECK OBJECT RECOGNITION CAMERA

    Note


    • DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

    • Do not apply excessive force to the N5 object recognition camera connector.

    B004V4XE02

    1. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      N5-7 (IGB) - N5-10 (GND) R - BR Power source Power switch on (IG) 11 to 14 V
      Power switch off Below 1 V
      N5-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω