GENERAL MAINTENANCE BODY


  1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY


    1. Tighten the bolts and nuts on the chassis parts listed below, if necessary.


      • Front axle and suspension

      • Drivetrain

      • Rear axle and suspension

      • Brake system

      • Engine mounts

      • Other chassis parts

    2. Tighten the bolts and nuts on the body parts listed below, if necessary.


      • Seat belt system

      • Seats

      • Doors and hood

      • Body mounts

      • Fuel tank

      • Exhaust system

      • Other body parts

  2. INSPECT TIRE AND INFLATION PRESSURE


    1. Inspect the tires for wear and proper inflation pressure.

      Click here

  3. INSPECT LIGHTS, HORN, WIPERS AND WASHERS

  4. CLEAN OR REPLACE AIR CONDITIONING FILTER


    1. Remove the air conditioning filter.


    2. Visually inspect the surface of the air conditioning filter.

    3. If the air conditioning filter is contaminated with foreign matter, clean or replace it according to the maintenance schedule.

      Note

      Some filters are not able to be cleaned.

  5. REPLACE AIR CONDITIONER CONDENSER DRYER


    1. Replace the air conditioner condenser dryer.


  6. CORROSION INSPECTION

  7. ROAD TEST


    1. Check the engine and chassis for abnormal noises.

    2. Check that the vehicle does not wander or pull to one side.

    3. Check that the brakes work properly and do not drag.