WIPER / WASHER SERVICE DATA

Click here

Table 1. Front Wiper Switch (for LHD)
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	z2-14 (MIST) - z2-5 (E)	MIST	Below 1 Ω
	z2-10 (W_OFF) - z2-5 (E)	OFF	Below 1 Ω
	z2-13 (+S) - z2-5 (E)	AUTO	Below 1 Ω
	z2-11 (+1) - z2-5 (E)	LO	Below 1 Ω
	z2-12 (+2) - z2-5 (E)	HI	Below 1 Ω

Table 2. Front Wiper Switch (for RHD)
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	z2-11 (MIST) - z2-4 (E)	MIST	Below 1 Ω
	z2-15 (W_OFF) - z2-4 (E)	OFF	Below 1 Ω
	z2-12 (+S) - z2-4 (E)	AUTO	Below 1 Ω
	z2-14 (+1) - z2-4 (E)	LO	Below 1 Ω
	z2-13 (+2) - z2-4 (E)	HI	Below 1 Ω

Table 3. Washer Switch (for LHD)
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	z2-15 (WF) - z2-5 (E)	ON	Below 1 Ω
Component without harness connected	z2-15 (WF) - z2-5 (E)	OFF	10 kΩ or higher

Table 4. Washer Switch (for RHD)
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	z2-10 (WF) - z2-4 (E)	ON	Below 1 Ω
Component without harness connected	z2-10 (WF) - z2-4 (E)	OFF	10 kΩ or higher

Table 5. Adjust Ring (for LHD)
Connector Condition	Tester Connection	Condition (Switch)	Specified Condition
Component without harness connected	z2-4 (VR) - z2-5 (E)	P1	1102 to 1218 Ω
	z2-4 (VR) - z2-5 (E)	P2	570 to 630 Ω
	z2-4 (VR) - z2-5 (E)	P3	256.5 to 283.5 Ω
	z2-4 (VR) - z2-5 (E)	P4	Below 1 Ω

Table 6. Adjust Ring (for RHD)
Connector Condition	Tester Connection	Condition (Switch)	Specified Condition
Component without harness connected	z2-5 (VR) - z2-4 (E)	P1	1102 to 1218 Ω
	z2-5 (VR) - z2-4 (E)	P2	570 to 630 Ω
	z2-5 (VR) - z2-4 (E)	P3	256.5 to 283.5 Ω
	z2-5 (VR) - z2-4 (E)	P4	Below 1 Ω

Table 7. Windshield Wiper Relay Assembly
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	3 - 5	Auxiliary battery voltage not applied between terminals 1 and 2	10 kΩ or higher
Component without harness connected	3 - 5	Auxiliary battery voltage applied between terminals 1 and 2	Below 1 Ω

Table 8. Headlight Cleaner Control Relay
Connector Condition	Tester Connection	Condition	Specified Condition
Component without harness connected	3 - 5	Auxiliary battery voltage not applied between terminals 1 and 2	10 kΩ or higher
Component without harness connected	3 - 5	Auxiliary battery voltage applied between terminals 1 and 2	Below 1 Ω