ROOF DRIP SIDE FINISH MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR ROOF SIDE GARNISH SUB-ASSEMBLY LH


    1. B000TLNC01
      B004CG0 Protective Tape

      Attach the claws and pin and install the rear roof side garnish sub-assembly LH.

    2. Remove the protective tape.

  2. INSTALL ROOF DRIP SIDE FINISH MOULDING LH

    Click here