ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH

    Click here

  2. REMOVE REAR ROOF SIDE GARNISH SUB-ASSEMBLY LH


    1. B000RJ7C01
      B004CG0 Protective Tape

      Apply protective tape around the rear roof side garnish sub-assembly LH as shown in the illustration.

    2. B000TH0C03
      *a Moulding Remover D
      B004CG0 Protective Tape

      Using moulding remover D, detach the claws and pin as shown in the illustration.

    3. B000RSVC01
      B004CG0 Protective Tape

      Detach the claws and remove the rear roof side garnish sub-assembly LH.