ROOF DRIP SIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL ROOF SIDE RAIL GARNISH SUB-ASSEMBLY LH


    1. B000RE7C02
      *1 Butyl Tape

      Apply new butyl tape to the roof side rail garnish sub-assembly LH.

    2. B000PAIC01
      B004B1M Install in this Direction

      Attach the pins.

    3. Attach the clip to the roof side rail garnish sub-assembly LH.

      Tech Tips

      Press the butyl tape firmly to attach it.

    4. B000QW9C02
      B004C4F Order of Install
      B004B1M Install in this Direction

      Set the roof side rail garnish LH in the direction indicated by arrow shown in the illustration and attach the clips and claw.

    5. B000OSF

      Install the roof side rail garnish sub-assembly LH with the 7 screws.

  2. INSTALL FRONT ROOF SIDE RAIL WEATHERSTRIP RETAINER LH


    1. B000RPAC01
      B004B1M Install in this Direction

      Insert the clip and attach the guides.

    2. B000QYJ

      Install the front roof side rail weatherstrip retainer LH with the 9 screws.

  3. INSTALL FRONT ROOF SIDE RAIL WEATHERSTRIP LH

    Click here

  4. INSTALL REAR ROOF SIDE GARNISH SUB-ASSEMBLY LH

    Click here

  5. INSTALL ROOF DRIP SIDE FINISH MOULDING LH

    Click here