WINDSHIELD OUTSIDE MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF DRIP SIDE FINISH MOULDING LH


    1. B000QM8C02
      B004CG0 Protective Tape

      Apply protective tape at the position shown in the illustration.

    2. Using moulding remover B, detach the claws.

    3. B000SWIC01
      B004B1M Remove in this Direction

      Pull in the direction of the arrow shown in the illustration to detach the claws and remove the roof drip side finish moulding LH.