ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. B000TGNC03
      B004B1M Install in this Direction (1)
      B004CNL Install in this Direction (2)

      Attach the clips going from the rear of the vehicle in the order shown in the illustration.

    2. B000PA2

      Install the screw.

      Tech Tips

      Use the same procedure for the other side.

    3. B000PGF

      Attach the claws and install the rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the other side.

    4. B000OZI

      Install the 2 screws.

    5. B000SWK

      Install the 2 screws and 5 clips.

    6. B000SB2

      Install the body rocker panel moulding assembly LH with the 3 screws.

    7. Remove the protective tape.

  2. INSTALL FRONT REAR WHEEL HOUSE PLATE LH

    Click here