ROCKER PANEL MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT REAR WHEEL HOUSE PLATE LH

    Click here

  2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH


    1. B000SLOC01
      B004CG0 Protective Tape

      Apply protective tape around the body rocker panel moulding assembly LH.

    2. B000SB2

      Turn the steering wheel to the left to provide space for the screw to be removed.

    3. Remove the 3 screws.

    4. B000SWK

      Remove the 2 screws and 5 clips.

    5. B000OZI

      Remove the 2 screws.

    6. B000QUO

      Detach the claws and remove the rocker panel moulding end cover.

      Tech Tips

      Use the same procedure for the other sides.

    7. B000PA2

      Remove the screw.

      Tech Tips

      Use the same procedure for the other sides.

    8. B000SN8C01
      B0049X5 Place Hands Here
      B004B1M Remove in this Direction (1)
      B004CNL Remove in this Direction (2)

      Place your hand at the position shown in the illustration and while pulling toward the outside of the vehicle, detach the clips and remove the body rocker panel moulding assembly LH.