NAME PLATE REMOVAL

PROCEDURE


  1. REMOVE SYMBOL EMBLEM

    Tech Tips

    When removing the symbol emblem, heat the luggage compartment door panel and symbol emblem using a heat light.

    Standard
    Item Temperature
    Luggage Compartment Door Panel 40 to 60°C (104 to 140°F)
    Symbol Emblem 20 to 30°C (68 to 86°F)

    1. B004A4SC02
      *a Wooden Block
      *b Boss Position
      B004CG0 Protective Tape

      Put protective tape around the symbol emblem.

    2. Insert piano wire between the luggage compartment door panel and symbol emblem.

      Tech Tips

      Be careful of the boss positions.

    3. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the symbol emblem to the luggage compartment door panel.

      Note

      Be careful not to damage the luggage compartment door panel.

    5. Remove the symbol emblem.

  2. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

    Tech Tips

    When removing the No. 3 luggage compartment door plate, heat the rear bumper cover and No. 3 luggage compartment door plate using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)
    No. 3 Luggage Compartment Door Plate

    1. B004AZ8C01
      *a Wooden Block
      B004CG0 Protective Tape

      Put protective tape around the No. 3 luggage compartment door plate.

    2. Insert piano wire between the rear bumper cover and No. 3 luggage compartment door plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the No. 3 luggage compartment door plate to the rear bumper cover.

      Note

      Be careful not to damage the rear bumper cover.

    5. Remove the No. 3 luggage compartment door plate.

  3. REMOVE NO. 2 REAR BODY NAME PLATE

    Tech Tips

    When removing the No. 2 rear body name plate, heat the body rocker panel moulding assembly LH and No. 2 rear body name plate using a heat light.

    Standard
    Item Temperature
    Body Rocker Panel Moulding Assembly LH 20 to 30°C (68 to 86°F)
    No. 2 Rear Body Name Plate

    1. B004CM3C01
      *a Wooden Block
      B004CG0 Protective Tape

      Put protective tape around the No. 2 rear body name plate.

    2. Insert piano wire between the body rocker panel moulding assembly LH and No. 2 rear body name plate.

    3. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.

    4. Pull the piano wire and scrape off the double-sided tape that holds the No. 2 rear body name plate to the body rocker panel moulding assembly LH.

      Note

      Be careful not to damage the body rocker panel moulding assembly LH.

    5. Remove the No. 2 rear body name plate.

  4. REMOVE NO. 1 REAR BODY NAME PLATE

    Tech Tips

    Use the same procedure described for the No. 2 rear body name plate.