REAR BUMPER INSTALLATION

PROCEDURE


  1. INSTALL REAR BUMPER COVER


    1. B004ATZC03
      B004B1M Install in this Direction

      Connect the connector.

    2. Attach the claws <B> and claws <C>.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    3. Attach the claw <A>.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    4. B004COP

      Fold back a part of edge of the rear fender liner, and attach the claw and grommet.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    5. Install the screw.

      Tech Tips

      Use the same procedure for the RH and LH sides.

    6. B004AZR

      Install the 2 screws.

    7. B004BQX

      Install the 8 clips.

    8. B004BO2

      Install the 4 screws.

  2. INSTALL REAR BUMPER CENTER GUARD


    1. B004BFO

      Type A:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

    2. B004C99

      Type B:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

    3. B004AMA

      Type C:


      1. Attach the claws.

      2. Install the rear bumper center guard with the 2 screws.

  3. INSTALL REAR COMBINATION LIGHT COVER LH

    B004AGPC01
    B004B1M Install in this Direction

    1. Attach the claws as shown in the illustration, and install the rear combination light cover LH.

  4. INSTALL REAR COMBINATION LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.