FRONT TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH


    1. B000PKXC01
      B004C4F Screw
      B004ANI Connector

      Detach the claw to disconnect the connector.

    2. Disconnect the connector and detach the wire harness clamp.

    3. Remove the 3 screws and front turn signal light assembly LH.